Tapered drill bit
Compared to normal drill bits, tapered drill bit have stronger gripping force. Additionally, tapered bits drill pilot holes with properly matched tapers to accommodate the sizes of wood screws that are most frequently use. Constructed from precision-sharpened, high-speed steel 7 that has been hard.
The pilot holes for the shank and threaded portion of a wood screw were design to pre-drilled with a tapered drill bit. Of course, the goal is to secure the best holding force from the wood screw by using the correct drill size and depth. This is crucial for fixing boards to build a boat’s hull or any other junction that must hold a lot of weight or strain. Building cabinets or securing a wood floor in a home are less critical applications.
The clearance hole through the wood that is being secure should be as close to the wood screw’s shank diameter as is practical. The clearance hole could be too small, causing the screw to tighten before it exerts its maximum pulling force on the fastened wood, or it could even break. The wood may shift, causing squeaks, wear, and leaks if the clearance hole is larger than the screw shank. Depending on the materials involved, the area around the screw may potentially gather moisture, leading to early corrosion or rotting.
Hard rock drillers widely use button bits in the oilfield, water well, HDD, and geothermal fields.
Compared to PDC drill bits, button bit have several benefits. They have two advantages: 1) they are less expensive, and 2) they are more impact-resistant since they can drill through gravels, dolomite, and extremely hard and abrasive limestone.
But more than 50% of the market for total footage drilled is now controlled by PDC drill bits.
Button Drill Bit
Button Drill Bit Made from premium raw materials using specialized heat treatment, tapered button bits made of tungsten carbide are of the highest caliber and are frequently used in hand-hole (short-hole) drilling systems for dimensional stone quarrying.
Get To Know More About Our Products:-